鹈鹕背着自行车

The user wants an SVG of a pelican carrying a bicycle on its back. Let me create a nice SVG illustration. Let me design: - A pelican standing/walking with a bicycle strapped on its back - Pelican: white/cream body, big beak with pouch (orange/yellow), long neck, webbed feet - Bicycle: two wheels, frame, handlebars, seat, pedals Let me write clean SVG code with gradients. Let me plan coordinates. Canvas 800x600. Pelican body around center-left. Body ellipse at (300, 340) rx 130 ry 90. Neck curving up from (240,280) to head at (200,180)... Actually pelican's beak is long. Let's have the pelican facing right maybe. Hmm, "背着自行车" - bicycle on back. Let's make pelican facing right. Body center (330, 360). Neck goes up-left then head... Actually let's have head at right top: head at (430, 220), beak extends right-down to (520, 260). Neck curved from body top (390, 300) to head. Bicycle sits on top of the body, at y ~ 230-260, spanning x 230-500. Hmm, that would overlap the neck. Let's instead have the bicycle on the back behind the neck, tilted. Bicycle tilted maybe. Simpler: pelican standing, facing left. Body at (400, 380). Neck rises at left: from (300,340) up to head at (230, 200). Beak points left-down from head to (120, 240). Legs below body at (380,450) and (440,455), feet at y 500. Bicycle on back: wheels at (330, 250) and (520, 240), radius 70. That sits above body top (body top y ≈ 290). Wheels bottom at y=320, slightly overlapping body — that's fine, looks like it's resting on back. Neck passes near x 280-320... front wheel at x 330 could conflict. Let's shift bicycle to the right: wheels at (400, 240) and (580, 250), radius 65. Body ellipse center (420, 380) rx 150 ry 95 → top at 285, right edge 570. Hmm rear wheel at 580 exceeds. Fine, slight overhang looks natural. Actually let's make the bike a bit tilted so it looks like carried. Let me be careful and just draw something coherent. Coordinates: - Canvas 900x650, background sky gradient. Ground line y=560, ellipse shadow at (450, 555). Pelican: - Legs: two legs from body bottom (390, 460) to foot (385, 545); and (470,455) to (480, 545). Feet webbed triangles. - Body: ellipse cx=430 cy=390 rx=155 ry=100, fill white gradient. - Tail feathers: polygon at right (560,370) → (650,340) → (620,400) → (565,415). - Wing: ellipse-ish path on body, fill #e8eef2, with feather lines. - Neck: thick curved path from (330,330) up to (255,235). Use stroke with round cap, width 62. Plus head circle at (245, 215) r 48. - Beak: upper mandible: path from (215,200) curving to (95,235) to (215,250). Pouch: path from (212,248) to (100,240) to (215,268)... Actually pelican beak: long straight upper mandible with hook at tip, and pouch hanging below. Let me do: Upper beak: M 218 196 L 105 228 Q 88 232 96 242 L 220 246 Z — roughly. Pouch: M 218 246 Q 150 300 222 282 Z ... hmm. Let me do: pouch path M 214 244 C 160 285, 130 288, 100 246 C 130 300, 190 305, 216 285 Z — messy. Simpler pouch: M 212 244 C 175 300, 130 292, 100 244 C 140 268, 185 265, 212 244 Z. Hmm. Actually simplest: beak upper mandible as a long triangle-ish shape pointing left and slightly down, and the pouch as a curved shape below it. Define: - Head center (250, 218), radius 50. - Beak starts at x=208 (left edge of head), y from 198 to 252. - Upper mandible: M 208 196 L 92 226 C 82 228 84 238 94 240 L 208 242 Z - Pouch: M 208 242 L 96 240 C 118 300, 170 305, 208 272 Z — that gives a hanging pouch. Good. Eye: circle at (268, 200) r 9, dark, with white glint. Bicycle: Wheels: front wheel center (585, 262) r 68; rear wheel center (405, 258) r 68. Wait the pelican's back top is at y=290 around x=430. Wheel bottoms at 330 and 326 — they'd overlap body. Good, resting on back. But neck at x~255-330, y 235-330 — rear wheel at x 405 r 68 spans 337-473, so no overlap with neck. Good. Bike frame between wheels: - Rear hub (405,258), front hub (585,262), bottom bracket (505, 330), seat tube up to saddle (455, 205), top tube from (455,212) to head tube (565, 215)... Let's define: - Bottom bracket: (505, 328) - Seat post top / saddle: (452, 200) - Head tube top: (568, 212), head tube bottom: (572, 240) - Handlebar at (575, 200) going left to (545, 195) Frame lines (stroke #c0392b red, width 9): - Seat tube: (505,328) → (452,208) - Down tube: (505,328) → (572,238) - Top tube: (455,215) → (568,218) - Chain stay: (505,328) → (405,258) - Seat stay: (452,212) → (405,258) - Fork: (572,238) → (585,262) Saddle: ellipse at (448,196) rx 28 ry 10, dark. Handlebar: path from (568,214) up to (566,196) then a line to (536,190), plus grip. Pedal crank: circle at (505,328) r 12; crank arm to (520,352) and pedal. Wheels: outer circle stroke #333 width 10, inner rim circle stroke width 4 lighter, spokes lines from center. Also add straps: two straps going over bike onto body — maybe two dark straps from bike down over the body. Let me add a strap: path from (420,205) curving over to (430, 330)? Straps would wrap around body. Draw two thick dark-gray bands crossing the bike frame vertically, going down along the body sides. Could be simplified as short curved strokes. I'll add straps: - strap1: path M 415 200 C 405 260, 410 320, 430 380 — hmm it would be over the bike. Draw straps on top (after bike) with semi-dark color. Actually let's just draw two straps as thick rounded strokes over the wheels region: from rear wheel area down over the body. Keep it simple: Strap A: M 372 245 C 350 300, 352 350, 372 400 (over rear part) Strap B: M 545 235 C 560 300, 552 355, 528 405 Hmm those are on the body. Fine — looks like the bike is strapped to the back. Colors: sky gradient light blue to pale. Ground: green-ish band. Let me also add small clouds. Now write the SVG. Spokes: generate manually maybe 8 lines per wheel. I'll write a few. Let me write it out. For spokes I'll use a group with transform rotate and multiple lines. Easier: define a `` with circles and spokes, then `` with transforms. But each wheel needs same. I can define symbol. Let me use `` with `` containing: circle r=68 stroke #34495e width 9 fill none; circle r=58 stroke #bdc3c7 width 5 fill none; spokes lines from center r=56, 12 spokes; hub circle r=8 fill #7f8c8d. Then `` — use with x/y translates. Since the wheel group is centered at 0,0, use x/y attributes to translate. Yes, `` translates by (405,258). Good. Now let's write. Text maybe a title? Not needed. Maybe add small decorative. Let me write the final SVG carefully. Spoke lines: for angle k*30°, from 0,0 to (56*sin, -56*cos). I'll just do 6 lines through center (diameter lines) = 12 spokes. Angles 0,30,60,90,120,150. line x1=0 y1=-56 x2=0 y2=56 (angle 0) angle 30: x=±28, y=±48.5 → line (-28,-48.5)-(28,48.5)... wait that's angle 30 from vertical: x = 56*sin30=28, y=56*cos30=48.5. So line from (-28,-48.5) to (28,48.5). Hmm actually rotate the vertical line by 30°: endpoints (56*sin30, -56*cos30) = (28,-48.5) and (-28,48.5). Yes. angle 60: (48.5,-28) to (-48.5,28) angle 90: (56,0) to (-56,0) angle 120: (48.5,28) to (-48.5,-28) angle 150: (28,48.5) to (-28,-48.5) Good. Now the full code. Also add tail and wing detail lines. Wing path: M 330 360 C 380 320, 500 330, 545 385 C 500 430, 380 435, 330 360 Z with fill #dde6ea and stroke. Feather lines inside wing: a few curved lines. Legs: stroke #e8a33d width 16, round cap. Leg1: M 385 455 L 378 528. Leg2: M 470 452 L 482 522. Feet: webbed — path M 340 538 L 378 522 L 415 538 L 378 532 Z ... Let's do: foot1 polygon: (378,522) → (330,545) → (368,540) → (378,548) → (392,540) → (420,545) → (378,522). Hmm complicated. Simpler triangle-ish webbed foot: M 378 520 L 328 548 L 368 542 L 378 552 L 390 542 L 428 548 Z. Fine. Ground shadow ellipse cx=430 cy=560 rx=200 ry=18 fill rgba dark. Also maybe the pelican slightly walking. Let me finalize. I'll write the HTML wrapper? The user asked for SVG. But instructions say render in iframe web browser — so deliver a full HTML page containing the SVG. I'll include full HTML with the SVG inline. Let me write it. Background: sky gradient rect, some clouds (ellipses white opacity), distant hills. Final code: ```html 鹈鹕背着自行车 ``` Now write SVG content fully. Sky gradient: id sky: 0% #bfe3f7, 100% #eaf6fc. Ground: rect y=520 height=130 fill #cfe3b4? Or path hills. Let's do a simple green ground with slight curve. Ground path: M 0 545 Q 200 520 450 535 T 900 528 L 900 650 L 0 650 Z fill #b9d99a, plus a darker band. Hills behind: M 0 540 Q 120 470 260 520 Q 380 555 520 505 Q 680 450 900 515 L 900 650 L 0 650 Z fill #a8cf8b. Fine. Now let me carefully produce final answer with the complete HTML. Also add a small bell/ding? no. Check the neck stroke: from (335,345) to (258,240) with width 62 — round cap. Then head circle at (250,218) r 50. The neck stroke's top end at (258,240) with radius 31 covers up to y=209. Head circle covers 168-268. Good overlap. Body top y = 390-100 = 290. Neck bottom end (335,345) r 31 → down to 376. Good overlap with body. But neck must not be hidden behind body: draw body first, then neck. Actually neck should be drawn after body so it's visible. But then neck covers body edge — fine. Order: shadow, tail, body, wing, legs, feet, neck, head, beak, eye, then bike, straps. Wait legs should be behind body — draw legs before body. Feet after legs. Tail: behind body at right: polygon (545,355) (665,315) (650,375) (560,410). Let me write. For the bike shadow on back — skip. OK, produce answer. One more check: bike wheels at y=258-262 with r=68 → bottom at 326-330. Body top at 290 near x=430; at x=405, body ellipse: (405-430)^2/155^2 + (y-390)^2/100^2 = 1 → (25/155)^2=0.026, so (y-390)^2 = 100^2*0.974 → y-390 = ±98.7 → top y=291. So wheel bottom 326 is 35px into the body. Good, looks resting. Straps: draw over bike. Strap colors #6b7b8c width 12. Strap A: M 370 232 C 348 290, 350 350, 375 402 — passes over rear wheel left area. Wheel rear spans x 337-473, y 190-326. Strap at x~350-375 crosses it. Good. Strap B: M 548 228 C 572 292, 566 352, 528 404 — front wheel spans 517-653, y 194-330. Good. These straps end on body around y 402. Good. Now final answer. Also add small detail: a red ribbon? no. Write it. ```html 鹈鹕背着自行车 · SVG 插画

``` 这幅插画包含： - **鹈鹕**：白色渐变身体、长脖颈、标志性大喉囊（橙黄色）、小眼睛、橙色蹼足，尾羽自然翘起。 - **自行车**：红色车架、带辐条的双轮、车座、车把、曲柄脚踏与链条，斜放在鹈鹕背上。 - **固定绑带**：两条深色绑带（带扣具）把自行车牢牢绑在背上。 - **场景**：天空渐变、白云、远山、草地与投影，让画面更完整。

鹈鹕被骑